Recent Publications in Journals

 

  • Mithun  Mohan and Satish Chandra (2018), “Critical gap estimation at two-way stop-controlled intersections based on occupancy time data”, Transportmetrica A: Transport Science, 14(4), 316–329. (IF = 2.25)
  • Mithun Mohan and Satish Chandra (2018), “Three methods of PCU estimation at Unsignalised intersections”, Transportation Letters: the International Journal of Transportation Research, 10(2), 68-74. (IF = 0.725)
  • Subhadip Biswas, Satish Chandra and Indrajit Ghosh (2018), “An advanced approach for estimation of PCU values on undivided urban roads under heterogeneous traffic conditions”, Transportation Letters: the International Journal of Transportation Research, published on line on December 25, 2018,  https://doi.org/10.1080/19427867.2018.1563268
  • Mithun Mohan and Satish Chandra (2018), “Influence of Major Stream Composition on Critical Gap at Two-Way Stop-Controlled Intersections - A Case Study”,  
    Transportation Letters: the International Journal of Transportation Research, Published on line, June 20, 2018. (IF = 0.725).
  • Arpita Saha, Souvik Choudhary, Satish Chandra and Indrajit Ghosh (2018), “Kriging based saturation flow models for traffic conditions in Indian cities”, Transportation Research, Part A, 118, 38-51, https://doi.org/10.1016/j.tra.2018.08.037 .(IF = 3.02)
  • A. K. Bharti, , Ch. Ravisekhar, and Satish Chandra, (2018), “Modeling travel time of car with varying demand on an urban midblock section”, Journal of Intelligent Transportation Systems, 22(2), 99-105. (IF 2.164)
  • Satish Chandra and Mithun Mohan (2018), “Analysis of Driver Behaviour at Unsignalized Intersections”, Paper Number 675, Journal of Indian Roads Congress, 79(2), 5-10.
  • P. Negi,  T. Chakraborty,  N. Kaur and S. Bhalla  (2018), “Investigations on Effectiveness of embedded PZT patches at varying orientations for monitoring concrete hydration using EMI technique”, Construction & Building Materials, 169 (Apr), 489-498. (IF 3.485)
  • S. Bhalla and N.Kaur  (2018), “Prognosis of Low-Strain Fatigue Induced Damage in RC Structures using Embedded Piezo-Transducers as Global cum Local Vibration Sensors”, International Journal of Fatigue, 113, 98-112. (IF 3.132)
  • N.Kaur, S. Bhalla and S.C.G.  Maddu, (2019) “Damage Detection, Retrofitting Assessment and Long Term Monitoring of Reinforced Concrete Structures using Embedded PZT Patches”, Journal of Intelligent Materials and Smart Structures, 30(1), 100-115. (IF 2.211)
  • Lincy Varghese, V.V.L.K. Rao and Lakshmy Parameswaran (2018), “A Study on Nanosilica and Microsilica added Concretes under Different Transport Mechanisms”, Concrete Research, Institute of Civil Engineers (UK), 70(23), 1205-1216.
  • Lincy Varghese, V.V.L.K. Rao and Lakshmy Parameswaran (2018), “Improvement of Early Age Strength of High Volume Siliceous Fly Ash Concrete with Nanosilica- A Review”, Advances in Civil Engineering Materials, ASTM International, 7(1), 599-615.
  • G. Bharath, Manoj Shukla, M.N. Nagabhushana, Satish Chandra and Amit Shaw (2019), “Laboratory and Field Evaluation of Cement Grouted Bituminous Mixes”, Road Materials and Pavement Design, 
    https://doi.org/10.1080/ 14680629.2019. 1567375
  • Ambika Behl, S.S. Kar, M.N. Nagabhushan, Satish Chandra, Manoj Shukla (2018), “Application of Foam Bitumen in Asphalt Pavement Recycling: A Case Study”, Journal of the Indian Roads Congress, 79(2), 29-37.
  • S.S. Kar, A.K. Swamy, Devesh Tiwari and P.K. Jain (2018), “Impact of recycled asphalt pavement on properties of foamed bituminous mixtures”, Baltic Journal of Road and Bridge Engineering, 13(1), 14-22, 
    https://doi.org/ 10.3846/ bjrbe. 2018. 383.
  • S.S. Kar, A.K. Swamy, Devesh Tiwari and P.K. Jain (2018), “Impact of low viscosity grade bitumen on foaming characteristics”, Journal of the South African Institution of Civil Engineering, 60(2), 40–52.
  • G. Bharath and M.A. Reddy (2018), “Estimation of Dynamic Modulus values of  bituminous Mixes from Repeated Indirect Tensile Test”, Indian Highways, Indian Roads Congress, 46(7), 15-24.
  • K. Arora, A.Behl and P.K. Jain (2018) “Design Approach for Low Volume Rural Road Using Nano-materials Stabilized soil, Journal of ASTM: Advances in Civil Engineering Materials 7(2), 19-31, https://doi.org/10.1520/ACEM20170029.
  • A. K. Sinha,   V. G. Havanagi  and  J.T. Shahu, (2019),  "Construction and performance of jarofix waste material embankment", Proceedings of the Institution of Civil Engineers – Construction materials, https://doi.org/10.1680/jcoma.18.00003.m
  • A. K. Sinha,   V. G. Havanagi and  J.T. Shahu  (2018),  "Characterization of jarofix for usage in geotechnical projects",  Proceedings of the Institution of Civil Engineers – Geotechnical Engineering, 171(5), 439–450.
  • G. S. Parvathi  and  P. K. Basudhar (2018), “Flexural response of beams on bisco-elastic foundations with predictions beyond the loading Area”,  International Journal of Geotechnical Engineering, Taylor and Francis Group Publications, DOI: 10.1080/19386362.2018.1450700. (IF 0.31)
  • G. S. Parvathi, V. G. Havanagi, V.K. Kanaujia and A.K. Sinha (2018), "Ground Improvement for the Construction of Road over Soft Organic Soil: A Case Study", The Bridge and structural Engineer, 48 (2), 70-80.
  • G. S. Parvathi, A.K. Sinha and V. G.  Havanagi (2019), “Red Mud - Fly Ash Mix as an Embankment Fill Material”, Indian Highways, Indian Roads Congress, 47(3), 20-25.
  • K. Singh, S. Mittal and K. Kumar, (2018), "Reduction in lateral displacement of cohesionless soil at Box tunnel face using nails in Overburden", International journal of Geosynthetics and Ground Engineering. 4(3), 21.
  • R.K. Panigrahi (2018), "Assessment of Rock slope Adjacent to Hill roadways", The Indian Mining & Engineering Journal, 57 (7), 12-17.
  • V.B Yadav, Sippy Kalra and Ranu Gadi, (2019), “Clay based nanocomposites for the removal of heavy metals from water: a review”, Journal of Environmental Management, 232, 803-817. (IF 4.45)
  • V.B. Yadav, Ranu Gadi and Sippy Kalra (2018), “Synthesis and characterization of novel nanocomposite by using kaolinite and carbon nanotubes”, Applied Clay Science, 155, 30-36. https://doi.org/10.1016/j.clay.2017.11.043.
  • A.M. Rao, S.Velmurugan and Satish Chandra (2018), “Impact of Road Safety Audit Implementation on Expressway”, Indian Highways, Indian Roads Congress, 46(11), 35 - 42.
  • Minal, K.K. Gajrani and  Ch. Ravi Sekhar (2018),“Impact of road rationing on modal shift andtransport sustainability in Delhi, India”, Proceedings of the Institution of Civil Engineers-Transport, DOI: 10.1680/jtran.18.00023. (IF 0.4)
  • Minal, Ch. Ravi Sekhar and Errampalli Madhu, (2018), “Development of Neuro-Fuzzy based Multimodal Mode Choice Model for Commuter in Delhi”, IET Intelligent Transport Systems, DOI: 10.1049/iet-its.2018.5112. (IF 1.38)
  • P. Deepa, Laad Meena, Sangita and Rina Singh, (2019), "An overview of use of nnoadditives in enhancing the properties of pavement construction binder bitumen", World Journal of Engineering, https://doi.org/10.1108/WJE-04-2018-0136
  • P. Das,  M. Parida, and V.K.Katiyar (2018), "Macroscopic Pedestrian Flow Modelling using Simulation Technique",  International Journal for Traffic & Transport Engineering 8(2), 166-176, DOI:10.7708/ijtte.2018.8(2).02
  • E. Madhu, K.S. Patil and C.S.R.K. Prasad (2018), “Evaluation of integration between public transportation modes by developing sustainability index in India”, Journal of Case Studies of Transport Policy, Elsevier Publishers, September 2018, https://doi.org/10.1016/j.cstp.2018.09.005.
  • Shewta Gaur, Niraj Sharma, Rajni Dhyani and Anil Singh (2018), “Environmental Auditing as a Risk Management Tool: Case Study of an Automobile Axle Manufacturing Unit in India”, Environmental Engineering & Management Journal, 17(11):2695-2702. (IF 1.334)
  • Niraj Sharma, P.V. Pradeep Kumar, A. Singh, R. Dhyani, Ch. Ravisekhar  and K. Ravinder  (2019), “Measurement of Idling Fuel Consumption and Estimation of Emission at Selected Signalized Intersections in Delhi”,  Journal of Cleaner Production, 212, 8-19. (IF= 5.651)
  • A.K. Bharti, Ch. Ravisekhar and Satish Chandra (2018), “Travel time reliability as a level of service measure for urban and inter-urban corridors in India”, Journal of Current Science, 114(9). ( IF 0.99)
  • Ankit  Kathuria, Ch. Ravisekhar and M. Parida (2018), “Examining failure rate dynamics to estimate capacity of bus rapid transit system corridor”, Journal of Proceedings of the Institution of Civil Engineers-Transport, https://doi.org/10.1680/jtran.17.00161. ( IF 0.402)

  • P.P. Kumara, Ch. Ravi Sekhar and M. Parida (2018), " Residential dissonance in TOD neighbourhoods", Journal of Transport Geography, 72,166-177. ( IF 2.69)

  • P.K. Sarkar and Ch. Ravisekhar (2019), “Smart Transportation System Citing Best Practices and its Relevance in Indian Cities”, Indian Highways, Indian Roads Congress, 47(2), 23-31.
  • G.R.Bivina, Purnima Parida, Mukti Advani and M.Parida (2018), “Pedestrian Level of Service Model for Evaluating and Improving Sidewalks From Various Land uses", European Transport, issue 67, paper no. 2, ISSN 1825-3997.
  • T.R. Bagul, Kiran Patil, Alka Kote, B.S. Balpgold, Ravindra Kuma and Rakesh Kumar (2018), “Analysis of Autorickshaw as an Intermediate Paratransit system”, International Journal of Pure and Applied Mathematics, 118(24). https://www.scopus.com/sourceid/19700182690#tabs=0. (SCI 0.23)